Neve

Brand: Neve

Product Code:

Availability: In stock

$0.00

Available Options

Neve conveys on your walls the brightness of the reverberation of the snow under the sun. It's an acrylic painting additived of colored microspheres and pyramid-shaped aluminum silvery scales, available in 169 Colours. It reacts to light by changing reflections, following the different illuminations. Neve is semitransparent so any stains and shades are a feature of the product.

Origini Technical Data Sheet

Technical data sheet

Le ORIGINI

sez. 1.0 Technical Characteristcs

Origini is a versatile paint that can meet the different needs of aesthetics, durability and washability thanks to our wax. A stylish finishing with a soft touch, with a matt or slightly glossy effect, or even stained, which conveys the beauty of something born in nature with an endless fascination.

 

sez. 2.0 Use

Origini is suitable for decorating indoor wall surfaces..

 

sez. 3.0 Preparing the surface

Preparing the wall is vital to the success of the coating. It is therefore advisable to trim and insulate properly before use, and to apply Primus Sabbia (as specified in the application method), which guarantee optimal grip and absorbency of the product. 

 

sez. 4.0 Application method

Apply Primus Sabbia in 2 coats by roller.

Origini is not ready to use: after introducing the quantity of COLOURING AGENT specified in the catalogue, add 20% water, up to 30% if needed, and then mix well until the shade obtained is completely even.

The product can be applied in 2 coats by brush.

First Coat: Apply the product by brush stretching and blending.

Second Coat: after 8 hours apply the second coat, stretching and blending.

If you want to realize a satinated/glossy effect, once the second coat has dried, it’s enough to stroke the wall with a big clean brush or with a cotton cloth.

If you want to realize a stained effect, stroke the wall with a clean brush before the wall is dried, so as to create stains on the still  wet areas.

 

sez. 5 Protective finish

Cera del vecchio: after the wall has dried, at least after 24 hours, apply the wax with a sponge, well stretching. After 5/10 minutes, pass on again with a cotton cloth, as to increase slightly the satinated effect. The finishing with Cera del Vecchio allows the washability of the wall.

 

sez. 6.0 Technical characteristics: application

Dilution/Mixing

Diluition with 20/30 % water before to use

Consumption

8 mq/l  with diluition of 20% 

Tools for application

Brush

Primus

Primus Sabbia

Protective coating

Cera del vecchio

Application temperature

The ambient temperature must not be less than +5° C. Do not apply onto hot surfaces or those exposed to sunlight.

Drying time

The drying time varies between 6 and 8 hours

 

sez. 7.0 Technical characteristics: the product

Composition

Slaked lime, water

Specific weight

1.29 Kg/l

pH after 30 days

> 12,5

Viscosity

> 6600 mPas (Brookfield, sonda n 3 , 10rpm 20° C))

Storage temperature

Store in a sealed pot at a temperature of more than +5° C. Keep away from extreme cold.

EU VOC limit value for this product (cat.  A/I): 300 g/l (2007) 200 g/l (2010)

 Max content VOC  2 g/l white

 

Colours available

As per our catalogue

Pot sizes

Lt  1 – 2,5 – 5

Warnings

If inhaled: Take the patient to a well ventilated location.

Contact with eyes: rinse immediately with plenty of running water for at least 10 minutes.

Skin contact: wash with running water; avoid prolonged contact.